DRIVE SYSTEMS DC Drive Motor & Bonfiglioli Riduttori MAS 16/P Gearbox, 340W, 160V, 2.2Amps

DC Drive motor with gear box and speed feedback removed from working machine. Excellent working condition.  $250 each (I have two).

Output shaft 16mm dia. with 5mm wide key.

DRIVE SYSTEMS srl
MATR. 570 39   94      DC 10R
TIPO 77 S      Nm 2.2  K 10
6/1' 1500      W 340   K 107
ARM.V. 160     A. 2.2  PROT. IP54

Bonfiglioli Riduttori Gear Box
Type MAS 16/P
CODE 210310182
Batch 12/94
Mount Pos. B3  i=12.47
Mounting holes on gearbox 110mm x 50mm between centers.

Total size 42cm x 16cm W x 19cm H, 13kg

Electrical Schematic Drawing of this drive connected to a Minivar is attached. I have one of these Minivar units available if required (please contact me).

HV Winding Strand-to-Strand (Hi-Pot & Resistance) Automated Test Panel

This is a Strand-to-Strand tester designed and built by myself. This tests the insulation between HV coil or Bar strands and the strands DC resistance.  The insulation is tested between each strand and all others at 250VAC (can be changed by replacing the transformer) and the strand resistance is measured by injecting 10ADC and measuring voltage drop. 

The system is automated for up to 64 strands and threshold levels for pass/fail can be set.  I have a full manual with the design that would come with the equipment.

The panel (600mm wide x 800mm high x 300mm deep, approx 40-50kg) has been removed from the wheeled frame and operates off a 240VAC supply, and requires a safety foot switch (or similar) to operate.

Please make me an offer if you are interested.

Nathan Edwards

youtopstuff@gmail.com

+61 437 201 404

Siemens, Circuit Breaker, In 315A, 3VF9527-1HK40

3VF9527-1HK40
IEC947-2

Thermal and Magnetic over current.
Door handle hardware.
Busbar connection bolts.

See photos for full details.

Post size 30x40x25, ~12kg+

Siemens, Circuit Breaker, In 160A, 3VF3211-1BW41-0AA0

3VF3211-1BW41-0AA0
IEC947-2

Thermal and Magnetic over current.
Door handle hardware.
Busbar connection bolts.

See photos for full details.
Post size 35x15x25, 4kg

Wire Insulation High Voltage Tester - 3.5kV, Hi-Pot, Breakdown Tester

MAKE ME and OFFER. This is a complete self contained unit for testing insulation breakdown of wire.

The sample wire is submersed in the container full of metal shot (or other conductive grains) and then High Voltage manually increased up to failure.

The unit has two ranges 0-200VAC (CB 0.03Amps) and 0-3500VAC (CB 0.65Amps). Main CB is 4 Amps. The test sample is inside a protective cover that activates safety switches to ensure no contact with operator can occur.

The unit was built in Australia to Australian wiring rules and was last calibrated 8/2/13.

Ideally this item would be pick up only but I can help with freight - it would require a wood box to package up.

645L x 400W x 400H mm, ~35kg

Siemens, SIVOLT V/A Series 6SG22.. Hybrid AC Controller

For phase control and multi-cycle control.

Model: 6SG2212-1CA00
Type: E400/E400/050 WL3RE
Input: AC 400V 50/60Hz
Output: AC 0...400V 50A

Operating Instructions manual included.
As new Condition. Removed from a machine.

~6kg  35x25x20cm

Norgren 200mm Pneumatic cylinder

 

$100. Norgren Pneumatic cylinder PRA/8050/M/*, 200mm stroke

Type, PRA/8050/M/* 200mm stroke FEATURES Capable of working up to 16 bar of pressure as standard Conforms to ISO 15552, ISO 6431, VDMA 24562 and NFE 49-003-1 Low static and dynamic friciton allows working at speeds down to 3mm/sec Operation: Double acting Standard: ISO 15552;ISO 6431;NFE 49-003-1;VDMA 24 562 Stroke length: 200 mm Port size: G1/4 Cylinder diameter: 50 mm